Functional 3D files for oddly specific needs.
Exact-size holders, organizers, mounts, and utility parts that are too niche for someone to model one by one — free STL and STEP downloads, digitally validated before they're published.
Categories
Organizers & Trays
Boxes and trays sized for one specific item or drawer, not a generic size that's almost right.
Kitchen & Everyday Utilities
Simple countertop and household helpers with clearly stated dimensions and no food-safety or heat-performance claims.
Grid Storage
Gridfinity-compatible baseplates and bins, including sizes and combinations most sellers don't stock.
Holders & Stands
Racks and trays that hold a specific item — vials, bottles, batteries, tools — at the exact diameter and count you need.
Spacers & Adapters
Fit-critical dimensional parts: spacers, hubs, and adapters built to one stated measurement.
Simple Mounts
Mounting plates and brackets built to an exact, stated hole pattern — official spec where one exists.
Desk & Display
Reading rests, letter racks, card bases, and other printable desktop display helpers.
Hobby & Miniatures
Printable painting, miniature display, and layout tools for creative projects.
Crafts & Sewing
Small tools for sewing, yarn, paper, and hand-worked craft tasks, with nominal dimensions and untested physical fit.
Gardening & Planters
Printable herb planters, pots, seed starting trays, and plant saucers.
Home & Bathroom
Simple household helpers: soap rests, sponge racks, razor stands, and doorstops.
Workshop Tools
Cable guides, small-parts handling accessories, and practical bench organizers.
Electronics & Maker Bench
Low-voltage bench rests, reference gauges, and organizers without electrical, fit, or thermal-safety claims.
Tabletop Games & Miniatures
Generic dice, card, terrain, and miniature accessories without branded game compatibility or rule-standard claims.
Browse objects
92 objectsSearch by name, use case, or category. Every result links to its dimensions, 3D preview, and downloads.
AA Battery Holder Tray — 30-Cell 5×6 Array
A tray that holds 30 AA batteries upright and organized in a 5×6 grid, for bulk battery storage in a count that doesn't match the fixed 16/20/25-count presets sold as ready-made holders.
117×97.5×33mm
AAA Battery Holder Tray — 24-Cell 4×6 Array
A tray that holds 24 AAA batteries upright and organized in a 4×6 grid, for bulk battery storage sized exactly to AAA's own diameter rather than a generic multi-size battery organizer.
93×62×28mm
C Battery Holder Tray — 15-Cell 3×5 Array
A tray that holds 15 C-cell batteries upright and organized in a 3×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
156×93.6×33mm
D Battery Holder Tray — 10-Cell 2×5 Array
A tray that holds 10 D-cell batteries upright and organized in a 2×5 grid, for bulk battery storage in a count that doesn't match the fixed 8/12-count presets sold as ready-made holders.
196×78.4×38mm
Manga Slipcase for 135×15×215mm Book
A protective slipcase sized to slide over one specific book/manga volume (135mm deep, 15mm thick, 215mm tall), so it fits snugly instead of using a generic case that's the wrong size for this exact volume.
137×17×216mm
Ribbed Tray, 185×90×12mm (5-Rib Fixed Version)
A shallow ribbed tray (185×90×12mm) for organizing small flat items, with 5 evenly-spaced parallel ribs dividing the tray into compartments.
185×90×12mm
Business Card Tray — Standard 88.9×50.8mm Card Stack
A shallow open tray sized to hold a flat stack of standard US/Canada business cards (88.9×50.8mm), for a reception desk or drawer -- a flat stacking tray, not an upright display stand.
95×57×15mm
Chapstick & Lip Balm Holder — 16-Tube 4×4 Tray
A tray that holds 16 chapstick or lip balm tubes upright and organized in a 4×4 grid, in a count between the 10-tube and 64-tube products sold as ready-made organizers.
108×108×38mm
CR2032 Coin Cell Holder Tray — 24-Cell 4×6 Flat-Lay Array
A flat-lay tray that holds 24 CR2032 coin cell batteries visible and organized in a 4×6 grid, in a count that doesn't match the fixed 10/15/17-count presets sold as ready-made holders or dispensers.
150×100×7mm
Craft Bias Tape Folding Guide
Fixed tapered channel guides flat fabric toward a narrower exit while the user folds it by hand.
82×38×10mm
Craft Card Corner Radius Stencil
Tracing plate provides four concave corner arcs for marking rounded card corners before hand cutting.
82×58×2.4mm
Craft Cross Stitch Thread Sorter
Flat card separates up to twelve cross-stitch thread lengths in edge-open hanger channels.
92×48×2.4mm
Craft Embroidery Floss Bobbin
Flat winding bobbin for one embroidery-floss length, with opposed end notches for parking loose ends.
50×32×2.4mm
Craft Knitting Needle Gauge Card
Compact knitting-needle card compares shaft diameters using eight separated nominal openings.
112×28×3mm
Craft Paper Corner Registration Fixture
Right-angle fixture gives paper or card stock a corner datum for hand alignment during layout.
68×58×11mm
Craft Polymer Clay Diagonal Texture Stamp
Small non-food polymer-clay stamp presses five parallel diagonal ridges into soft clay by hand.
76×66×5.8mm
Craft Quilling Strip Comb
Wide-tooth comb holds separated paper loops while a quilling strip is shaped by hand.
58×24×18mm
Craft Seam Allowance Marking Guide
Fence-edge marking guide transfers five fixed seam offsets onto flat fabric or paper.
112×38×6.8mm
Craft Thread Spool End Dock
Small tabletop dock gives one loose sewing-thread spool end a defined place to rest.
68×34×17mm
Gusseted L-Profile Bookend
Freestanding L-profile with a diagonal gusset and shallow underside toe relief; not load-rated or anti-slip tested.
112×62×96mm
Desktop Letter Divider Rack
Open comb rack with three vertical divider blades for separating letters or small documents into four bays; paper fit is unverified.
112×54×78mm
Open-Book Reading Rest
Inclined support deck with a raised toe and rear return for resting an open book while reading.
132×150×70mm
Single-Slot Desk Nameplate Base
A narrow open groove holds one card or thin nameplate upright; nominal card thickness is stated, not universal fit.
110×30×10mm
10ml Boston Round Bottle Holder — 12-Bottle 3×4 Rack
A rack that holds 12 standard 10ml Boston Round bottles (the common format for e-liquid, dropper, and cosmetic bottles) upright and organized in a 3×4 grid, in a count between the 10-bottle and 21-bottle products sold as ready-made holders.
116×87×28mm
Loose Inclined Breadboard Viewing Stand
Rest a small breadboard at an incline for tabletop circuit viewing without a snap-fit or device-size promise.
78×48×29mm
Loose Caliper Measuring Pose Rest
Keep a caliper in a repeatable resting pose between measurements without constraining its jaws or claiming a model-specific fit.
104×30×8mm
Jumper Wire Length Reference Stick
Compare loose jumper leads against spaced reference notches while sorting an electronics project; it is not a calibrated measuring instrument.
120×18×3mm
Jumper Offcut Winding Mandrel
Wind loose short jumper-wire offcuts around a central post so they stay together on a maker bench; no retention or bend-radius guarantee.
42×42×29mm
Small Enclosure Label Alignment Template
Position repeated small labels by aligning a removable template window with a plain project enclosure; this is a generic layout aid, not a device-specific panel template.
80×40×2.4mm
Component Lead Spacing Gauge
Compare loose component leads against three nominal center spacings before bending; the holes are references, not a component fit guarantee.
70×16×3mm
Open PCB Edge Display Rail
Stand a bare circuit board on an open shallow edge channel while leaving its faces accessible for a tabletop demonstration.
72×16×12mm
Low-Voltage Plug End Parking Gate
Separate loose low-voltage plug ends into open width classes at a bench so they do not slide together; no connector standard or fit is claimed.
64×28×20mm
Loose Probe Tip Parking Plate
Park loose low-voltage probe tips separately on a bench between measurements; aperture sizes are generic and do not assert probe compatibility.
64×28×8mm
Open Sensor Module Demonstration Shelf
Display one small sensor module above a tabletop base with an open front and accessible sides for a live demonstration.
64×48×10mm
Gridfinity 4×3 Bin Base, 23U Tall (167.5×125.5×161mm)
A tall Gridfinity-compatible storage bin (4×3 grid footprint, 23 units tall) for a toolbox-style build where standard bin heights are too short.
167.5×125.5×161mm
Gridfinity Baseplate — Custom 4×3 (168×126mm)
A Gridfinity baseplate at a non-stock 4×3 unit size (168×126mm), for fitting a small or irregular drawer that doesn't match common preset baseplate sizes.
168×126×4.4mm
Gridfinity 1×1 Bin — Loose Electronics Component Storage
A single-cavity 1×1 Gridfinity bin (21mm deep) for loose storage of one small-parts type (e.g. one resistor or capacitor value) per bin, sized to the standard Gridfinity grid so it drops into an existing baseplate.
41.5×41.5×21mm
Gridfinity 2×2 Bin — Loose Hex/Allen Key Storage
A single-cavity 2×2 Gridfinity bin (28mm deep) for loose storage of a hex/Allen key set, sized to the standard Gridfinity grid so it drops into an existing baseplate.
83.5×83.5×28mm
Gridfinity 2×1 Bin — Loose USB/SD Card Storage
A single-cavity 2×1 Gridfinity bin (21mm deep) for loose storage of USB flash drives or SD/microSD cards, sized to the standard Gridfinity grid so it drops into an existing baseplate.
83.5×41.5×21mm
12-Compartment Watercolor Half-Pan Storage Tray
Keep twelve loose watercolor half-pans in separate open compartments on a stationary desk or in a drawer. This is a storage tray, not a palette, travel case, or protective container.
69.8×80×13.6mm
1/4in Hex Bit Holder — 24-Bit 4×6 Desk Tray
A desk-scale tray that holds 24 standard 1/4in hex-shank driver bits upright and organized in a 4×6 grid, at a smaller scale than the bulk wall-mounted 72-bit organizers sold for workshop use.
74.04×49.36×28mm
Fine Detail Brush Rest
Temporarily support small paintbrush handles above a work surface in six shallow saddles.
82×16×13mm
Round Bust Display Pedestal
Present a small bust or single round-foot miniature on concentric stepped tiers.
72×72×24mm
Hex Terrain Marking Template
Trace a repeatable hex grid on scratch-built tabletop terrain.
86×54×2.4mm
Parallel Stripe Guide
Mask and trace four consistent parallel paint or pencil bands.
88×58×2.4mm
Vial Holder Tray — 20× 18mm Vials, 4×5 Array
A tray that holds exactly 20 cylindrical vials (18mm diameter, 60mm tall) upright and stable in a 4×5 grid, for lab/craft/storage use where no off-the-shelf rack matches this vial size and count.
115×92×21mm
A single triangular wedge intended to be placed under a door edge to hold it ajar
A single triangular wedge intended to be placed under a door edge to hold it ajar.
108×44×24mm
A bathroom counter stand that rests one handled razor across two raised support bars above an open base
A bathroom counter stand that rests one handled razor across two raised support bars above an open base.
104×58×30mm
A raised bathroom sponge rack with four feet, side support rails, and five spaced deck slats
A raised bathroom sponge rack with four feet, side support rails, and five spaced deck slats.
124×82×21mm
A round tabletop herb planter with five open drainage holes through the floor
A round tabletop herb planter with five open drainage holes through the floor.
100×100×88mm
A shallow circular catch basin for collecting runoff beneath a small plant pot
A shallow circular catch basin for collecting runoff beneath a small plant pot.
122×122×9mm
A six-cell seed-starting tray with full-height partitions and one drain hole per cell
A six-cell seed-starting tray with full-height partitions and one drain hole per cell.
115×88×46mm
A bar-soap rest made from five separated longitudinal rails and two end rails, leaving open drainage gaps
A bar-soap rest made from five separated longitudinal rails and two end rails, leaving open drainage gaps.
76×112×5mm
A single square nursery pot with an open top and four floor drainage holes
A single square nursery pot with an open top and four floor drainage holes.
72×72×76mm
Four-lane coaster airing rack
Four raised parallel rails and end bars keep coasters separated in an open rack.
102×84×28mm
Open-front paper filter sleeve stand
A rear stop and two low side rails support a packaged paper-filter sleeve above a flat base.
112×78×66mm
Countertop cleaning-cloth airing rail
Two feet and upright masts support one horizontal open rail for a cleaning cloth.
126×56×78mm
Three-post reusable bag loop keeper
Three separated round posts provide loose-loop parking points on a low base.
104×46×26mm
Loose utility-roll cradle
A base with two triangular end supports holds a loose roll above the surface.
136×52×39mm
Single-slot vertical board storage spacer
A base and two parallel cheeks form one nominal open-ended storage slot.
104×72×27mm
5/8in Marker Holder — 20-Slot 4×5 Desk Organizer
A desk organizer that holds 20 markers upright in a 4×5 grid, sized for markers with a 5/8in (15.875mm) barrel -- a different, chunkier diameter than slimmer pens/highlighters.
104.38×83.5×43mm
OPI-Size Nail Polish Rack — 15-Bottle 3×5 Tray
A tray that holds 15 nail polish bottles upright in a 3×5 grid, sized specifically for OPI-diameter bottles (~32mm), for a mid-size collection between small desk trays and 72+ bottle modular racks.
185×111×23mm
3D Printer Nozzle Holder Tray — 8-Nozzle 2×4 Array
A standalone tray that holds 8 standard M6 3D-printer nozzles (V6, MK8, and similar) upright and organized in a 2×4 grid, for makers who want their spare nozzles sorted without needing an existing Gridfinity system.
43.2×21.6×10mm
Citadel Paint Pot Rack — 25-Pot 5×5 Array
A rack that holds 25 Citadel/Games Workshop-style paint pots upright and organized in a 5×5 grid, in a count that doesn't match the fixed 15/20-pot presets sold as ready-made racks.
195×195×28mm
18mm Pen & Marker Holder — 24-Slot 4×6 Desk Organizer
A desk organizer that holds 24 pens/markers/paintbrushes upright in a 4×6 grid, sized for 18mm-diameter items, at a count between the two standard preset sizes sold ready-made.
138×92×73mm
Playing Card Deck Box — 2-Deck Poker-Size Tray
A flat storage box that holds two standard poker-size playing card decks (63.5×88.9mm each), side by side in separate compartments, for card players and board-game collections that overflow their original paper boxes.
95×143×20mm
Raspberry Pi 4B Wall Mounting Plate — 58×49mm Hole Pattern
A flat wall-mounting plate with 4 holes at the Raspberry Pi 4 Model B's official mounting hole spacing (58×49mm, 2.7mm diameter for M2.5 screws), for screwing a Pi board directly to a wall or panel.
80×70×4mm
2.5in Drive Hole-Pattern Plate — Nominal SFF-8201 Spacing
An 80x95mm flat plate with four through holes laid out to the published nominal 2.5in drive mounting pattern. It is a generic hole-pattern plate, not a drive-retention assembly or a confirmed fit for a drive, chassis, DIN rail, or enclosure. Some thin drives may omit bottom mounting holes, so this pattern does not establish compatibility with every 2.5in drive.
80×95×3mm
Marked tabletop area boundary ring
Marks an annular tabletop area boundary with twelve raised orientation ticks.
100×100×3.2mm
Open-front deck draw shoe
Stages a loose card deck with a low front stop so the next card can be drawn without opening a box.
78×104×27mm
Splayed-wall dice catch tray
Catches loose dice in a shallow tray whose side walls flare outward for rebound space.
98.588×92×19.137mm
Open dice tower with alternating baffles
Rolls tabletop dice through a one-piece tower and out a low retrieval opening.
60×60×120mm
Open hex terrain tile edge gauge
Uses five raised perimeter rails to loosely register a generic hex terrain tile while leaving one edge open for access.
62.598×54.962×6mm
Six-slot initiative card row stand
Keeps six generic initiative cards ordered upright in separate open slots during a tabletop encounter.
142.8×30×28mm
Open 32 mm miniature base placement guide
Provides a loose C-shaped visual boundary for positioning a nominal 32 mm round miniature base.
50.393×52×4mm
150 mm nominal tabletop range ruler
Measures short tabletop distances with raised five-millimetre graduations and a raised start datum.
150×14×5.6mm
Stepped tabletop token dispenser
Feeds loose resource counters from a rear loading bay down an open stepped path to a front pickup lip.
46×126×15mm
Loose terrain wall corner locator
Locates two perpendicular tabletop terrain edges against an open L datum while leaving two approach sides clear.
64×64×15mm
16mm Test Tube Holder — 8-Tube 2×4 Rack
A rack that holds 8 test tubes upright and stable in a 2×4 grid, sized for 16mm-diameter tubes, for lab/hobby use at a specific tube size and count not matched by a generic rack.
84×42×28mm
1/4-20 Tripod Adapter Plate — Universal Spacer
A flat plate with a single clearance hole for a standard 1/4-20 UNC tripod screw, for adding spacing between a tripod head and a camera or device, or as a simple pass-through mounting plate. This is a plain clearance hole, not a threaded socket or a locking quick-release mechanism.
50×50×5mm
Vial Holder Tray — 9× 22mm Antibody/Dye Vials, 3×3 Array
A tray that holds 9 cylindrical 22mm-diameter glass vials upright and stable in a 3×3 grid, sized for lab vials used for antibodies or dyes, where a published single/double holder doesn't cover a larger batch.
81×81×18mm
Wine Cork Storage Tray — 20-Cork 4×5 Array
A tray that holds 20 standard wine corks upright and organized in a 4×5 grid, for collectors and home winemakers who save corks and want them stored (not loose in a drawer or jar).
145×116×23mm
Four-bay open bench locator
Separates loose hand tools or work-in-progress parts into four open staging lanes.
72×54×4.8mm
Open bench transfer chute
Moves dry small parts between adjacent trays along an open guided channel.
36×90.05×12mm
Six-channel open cable comb
Separates loose low-voltage patch and charging leads on a bench.
72×51×9mm
Wide-channel desk cable comb
Separates three thicker desk leads at a shared work position.
64×46×9.25mm
L-turn cable corner guide
Routes a loose cable around a right-angle bench corner without circular holes.
54×54×9mm
Open cable transit saddle
Keeps one loose cable route visible while it crosses a work surface.
58×24×10mm
Micro hardware transfer funnel
Transfers dry small screws and washers from a shallow bin into a narrow jar opening.
54×54×37mm
Wide-mouth dry-parts funnel
Guides mixed dry fasteners from a bench cup into a wider parts jar.
86×86×47mm
Small-parts scoop with pour lip
Scoops loose dry hardware from a bin and pours it through a narrow front lip.
52×87.04×24.4mm
Loose wire-spool tail clip
Keeps the free end of craft or low-voltage hookup wire near a spool between uses.
22×2.4×11mm
Why MyMakerPilot
Exact fit, not close enough
Every object is built to a stated dimension or count, not squeezed from a generic template that's almost the right size.
Digitally validated before publishing
Geometry, dimensions, and manifold checks run on every model before it goes live — see the validation section on each object page.
Free STL and STEP, every time
Every model ships as both file formats. No account, no paywall, no watermark.
How it works
- 1
Find your object
Search by name or use case, or narrow down by category.
- 2
Check the fit
Confirm the exact dimensions and any stated assumptions on the object page.
- 3
Download and print
Grab the STL or STEP file and print it — no sign-up required.