Manga Slipcase for 135×15×215mm Book
A protective slipcase sized to slide over one specific book/manga volume (135mm deep, 15mm thick, 215mm tall), so it fits snugly instead of using a generic case that's the wrong size for this exact volume.
Dimensions
| X | 137 mm |
| Y | 17 mm |
| Z | 216 mm |
Assumptions
- 1mm sleeve clearance per side, for a loose slide fit (not an exact press fit)
- 1.6mm wall thickness (standard thin-wall FDM default)
Validation status
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.