Playing Card Deck Box — 2-Deck Poker-Size Tray
A flat storage box that holds two standard poker-size playing card decks (63.5×88.9mm each), side by side in separate compartments, for card players and board-game collections that overflow their original paper boxes.
✓ Full requirement coverage✓ Digitally validated
Key dimensions
| X | 95 mm |
| Y | 143 mm |
| Z | 20 mm |
About this model
63.5x88.9mm is the official poker-size playing card standard. Board-game and card-game overflow storage is a well-established real 3D-printing demand category; a simple 2-deck flat tray is a concrete, dimensionally-solid instance of that broader real pattern.
Fit notes
- 88.9mm official poker-size playing card length plus margin
- Two 63.5mm-wide (official poker card width) compartments side by side, split by one internal divider
- 20mm height -- fits a typical fresh 52-54 card deck stack (~15-18mm) plus margin
- Cards lie flat, stacked -- this is a flat storage box, not an upright card-catalog-style rack
Printing & use notes
No print settings (layer height, infill, supports) are specified for this model — use standard settings for your printer and material. See the validation section below for what has and hasn't been checked.
Validation
Requirement coverage
Full — this model covers the stated requirement completely.
LOW RISK Low risk — simple geometry, loose clearances, not load-bearing.
Digitally validated
- ✓ Geometry valid
- ✓ Matches stated dimensions/spec
- ✓ Manifold (watertight)
- ✓ Slicer compatible
- External manufacturing preflight: not checked
Physical fit and print performance
Physical fit and material/printer-specific performance are not independently guaranteed unless explicitly stated. Physical validation status for this object: not yet physically tested.
MyMakerPilot does not guarantee shrinkage, warping, layer adhesion, strength, real-world load bearing, printer-specific tolerance, or first-print functional usability. Physical printing is optional calibration/sampling, not a publishing requirement.
Technical details
Internal provenance and file references, for anyone who wants the full picture.
- Object ID
- playing-card-deck-box
- Category
- organizers
- Risk classification
- low
- External preflight
- unknown
- Physical validation
- unknown
- Production cost
- unknown
- Human review time
- unknown
- STL file
- /objects/playing-card-deck-box/model.stl
- STEP file
- /objects/playing-card-deck-box/model.step
Similar objects
Manga Slipcase for 135×15×215mm Book
A protective slipcase sized to slide over one specific book/manga volume (135mm deep, 15mm thick, 215mm tall), so it fits snugly instead of using a generic case that's the wrong size for this exact volume.
137×17×216mm
Ribbed Tray, 185×90×12mm (5-Rib Fixed Version)
A shallow ribbed tray (185×90×12mm) for organizing small flat items, with 5 evenly-spaced parallel ribs dividing the tray into compartments.
185×90×12mm
Business Card Tray — Standard 88.9×50.8mm Card Stack
A shallow open tray sized to hold a flat stack of standard US/Canada business cards (88.9×50.8mm), for a reception desk or drawer -- a flat stacking tray, not an upright display stand.
95×57×15mm